Skip to main content

Digital Trends may earn a commission when you buy through links on our site. Why trust us?

The best of biomimicry: Here’s 7 brilliant examples of nature-inspired design

Sometimes the best solution to a problem isn’t alway the most complex, and, similarly, the best answer isn’t always a new one one. While us humans may just be getting our feet wet (relatively speaking) with ingenuity, the animal kingdom has millennia of evolutionary trial-and-error to learn from.

Biomimicry, as it’s called, is a method for creating solutions to human challenges by emulating designs and ideas found in nature. It’s used everywhere: buildings, vehicles, and even materials — so we thought it’d be fun to round up a few of the most noteworthy examples. Here are eight of the most astounding technological applications inspired by nature.

Recommended Videos

Bullet trains inspired by Kingfisher birds

When Japanese engineers took on the daunting task of upgrading their high-speed bullet trains their design hit one unfortunate snag. The problem wasn’t getting this trains up to the desired speeds, but rather the massive amount of noise created by the displacement of air ahead of the trains. As the trains entered tunnels, the vehicles would often create a loud shock wave known as “tunnel boom.” The power of the shock waves even caused structural damage to several tunnels.

The design team determined the culprit to be the trains rather blunt front nose cap. To minimize the tunnel boom and increase overall aerodynamics they would need a more streamlined nose. The engineers eventually modeled the next model after the beak of the Kingfisher bird.

Kingfisher birds have specialized beaks allowing them to dive into water to hunt while making a minimal splash. Utilizing this new nose, the next generation 500 series trains were 10 percent faster, consumed 15 percent less electricity , and, most importantly, no more “boom.”

Wind turbines modeled after Humpback whales

Many of our modern aerodynamic designs rely on rather basic principles. To obtain optimal lift and minimal drag, sleek edges and clean lines are key. However, throughout the animal kingdom, many species, capable of exceptional lift. The Humpback whale, for example, uses bumpy, tubercle fins for propulsion — which seems rather counterintuitive.

A Harvard led research team determined that these nodules, enable the whales to choose a steeper “ angle of attack .” The angle of attack is the angle between the flow of water and the face of the flipper. With Humpback whales, this attack angle can be up to 40 percent steeper than a smooth flipper. Due to these small ridges, sectional stalls occur at different points along the fin. This makes a full on stall much easier to avoid.

Tests conducted by the U.S. Naval Academy, using model flippers, determined these biomimetic fins reduced drag by nearly a third and improved lift by eight percent overall.  Whale Power, a company based in Toronto, Canada has already capitalized on this latest tubercle tech. According to MIT , Whale Power’s biomimetic blades help generate the “same amount of power at 10 miles per hour that conventional turbines generate at 17 miles per hour.”

Antimicrobial film mimicking sharkskin

Sharks are one of the apex predators of the seas. Their hunting prowess has been fine-tuned over millennia of evolution. While sharks are well known for their acute sense of smell and regenerating teeth, new research may actually point to the species’ skin as its most evolutionary niche asset.

Sharkskin is covered with so-called “dermal denticles.” Think of these as essentially flexible layers of small teeth . When in motion, these dermal denticles actually create a low-pressure zone. This leading edge vortex essentially “pulls” the shark forward and also helps to reduce drag. Needless to say, there are plenty of applications for such a design.

Speedo notoriously incorporated biomimetic sharkskin into a line of swimsuits for the 2008 Olympics. According to the Smithsonian , 98 percent of the medals at the 2008 Olympics were won by swimmers wearing this sharkskin swimwear. Since then the technology has been banned in Olympic competition.

Similarly, while many aquatic species are known to host other marines species on their bodies (such as barnacles) sharks remain relatively “clean” so to speak. These microscopic dermal denticles also help sharks fend-off micro organisms. The U.S. Navy has since developed a material, known as Sharklet , based on this skin pattern to help inhibit marine growth on ships. Based on this same idea, many hospitals are also using a biomimetic sharkskin film to combat cross-contamination.

Sharkskin, so hot right now.

Harvesting water like the Stenocara beetle

Wikimedia Commons

It’s really no secret at this juncture: access to water is pivotal to any sustainable civilization and life on this planet in general. While some locations on the globe have bountiful water resources such as lakes and rivers, more arid climates must make do with limited precipitation. Technology derived from a beetle thriving in one of the harshest environments on Earth may very well help start the next generation of clean water harvesting.

The Stenocara beetle lives in the arid African Namib dessert, but the dime-sized critter has an evolutionary hack to help it literally pull water out of literal thin air. A pattern of nodes along the beetle’s back enable the creature to collect moisture from the morning fog. The droplets then slide off the bumps into small channels towards the beetle’s mouth. Academics are currently using this research to develop biomimetic patterns capable of harvesting water from the air.

Absorbing shock like a woodpecker

123RF/AbiWarner

Woodpeckers are known for their exceptional excavating capacity. The creatures use their beaks to forage for insects and also to create nooks for themselves. As woodpeckers bore these holes, they experience a deceleration of 1200 gravitational pulls (Gs) nearly 22 times per second. To put that in perspective, a severe car crash would deliver the equivalent of 120 Gs on a passenger. Just how does the woodpecker withstand these perpetual jolts?

The answer: natural shock absorbers. Using video and CT scans, researched at the University of California, Berkeley, discovered that woodpeckers have four structures designed to absorb mechanical shock. The bird’s semi-elastic beak, an area of “ spongy bone ” material behind the skull, and cerebrospinal fluid all work in unison to extend the time over which this concussion occurs and therefore inhibiting vibration. Based on this multifaceted design, the team is working to create an array applications ranging from more shock-resistant flight recorders (black boxes) to micrometeorite-resistant spacecrafts.

Cephalopod camouflage

Squids, like all cephalopods, are capable of glowing (bioluminescence) as well as changing their skin color. This camouflaging capacity enables them to hide from predators while the bioluminescence allows them to communicate with and/or attract a mate. This complex behavior is produced by a network specialized skin cells and muscles.

Researchers at the University of Houston have developed a similar device capable of detecting its surrounds and matching this environment in mere seconds. This early prototype uses a flexible, pixelated grid utilizing actuators, light sensors, and reflectors. As the light sensors detect a a change in the surroundings, a signal is sent to the corresponding diode. This creates heat in the area and the thermochromatic grid then changes color. This artificial “skin” could have both military and commercial applications down the road.

Ventilation systems inspired by termites

Oftentimes, biomimicry isn’t simply about mimicking an anatomical or evolutionary niche of a species. Sometimes, we can even take cues from the structures these animals build to create better life support systems for ourselves.

Termites often get a bad rap because of their destructive properties. However, termites are infamous for creating some of the most elaborate ventilation systems for cooling on the planet. Even in some of the hottest places, these termite mounds, remain exceptionally cool inside.

Using an intricate network of intentionally air pockets, the mounds create a natural ventilation system using convection.  The engineering firm Arup built an entire shopping center in Zimbabwe based on this natural convection system. Currently the system uses 10 percent less energy than a traditional air-conditioned facility.

Dallon Adams
Former Editorial Assistant
Dallon Adams is a graduate of the University of Louisville and currently lives in Portland, OR. In his free time, Dallon…
Toyota unveils 2026 bZ: A smarter, longer-range electric SUV
toyota bz improved bz4x 2026 0007 1500x1125

Toyota is back in the electric SUV game with the 2026 bZ, a major refresh of its bZ4X that finally delivers on two of the biggest demands from EV drivers: more range and faster charging.
The headline news is the improved driving range. Toyota now estimates up to 314 miles on a single charge for the front-wheel-drive model with the larger 74.7-kWh battery—about 60 miles more than the outgoing bZ4X. All-wheel-drive variants also get a boost, with up to 288 miles of range depending on trim.
Charging speeds haven’t increased in terms of raw kilowatts (still capped at 150 kW for DC fast charging), but Toyota has significantly improved how long peak speeds are sustained. With preconditioning enabled—especially helpful in colder weather—the new bZ can charge from 10% to 80% in about 30 minutes. Also new: Plug and Charge support for automatic payment at compatible stations and full adoption of the North American Charging Standard (NACS), meaning access to Tesla Superchargers will be standard by 2026.
Under the hood, or rather the floor, Toyota has swapped in higher-performance silicon carbide components to improve efficiency and power delivery. The AWD version now produces up to 338 horsepower and sprints from 0–60 mph in a brisk 4.9 seconds.
Toyota didn’t stop at just the powertrain. The exterior has been cleaned up, with body-colored wheel arches replacing the black cladding, and a sleeker front fascia. Inside, a larger 14-inch touchscreen now houses climate controls, giving the dash a more refined and less cluttered appearance. There’s also more usable storage thanks to a redesigned center console.
With the 2026 bZ, Toyota seems to be responding directly to critiques of the bZ4X. It’s faster, more efficient, and more driver-friendly—finally bringing Toyota’s EV efforts up to speed.

Read more
Cheaper EVs ahead? GM and LG say new battery cells are the key
2025 Chevrolet Equinox EV front quarter view.

General Motors and LG Energy Solution have announced a new phase in their ongoing partnership: developing a new battery cell chemistry that could significantly lower the cost of electric vehicles. The joint effort centers on lithium manganese iron phosphate (LMFP) battery cells, a variation of lithium iron phosphate (LFP) that’s gaining popularity for being more affordable and less reliant on expensive materials like nickel and cobalt.

This is a big deal because battery costs are still the single largest expense in producing EVs. According to GM and industry experts, LMFP cells could help bring the cost of electric vehicles close to — or even on par with — gas-powered cars. The goal? Making EVs accessible to a broader range of drivers without sacrificing range or performance.

Read more
Archer’s flying taxis head to LA for the 2028 Olympics
archer air taxi la28 inglewood aerial a final

Remember the buzz about flying taxis zipping through Paris for the 2024 Olympics? That sci-fi fantasy never got off the ground —Germany’s Volocopter dream was denied certification, leaving fans staring at the same old ground traffic. But now, the skies are opening again for a second shot at glory—this time over Los Angeles.
Archer Aviation, the California-based electric vertical takeoff and landing (eVTOL) company, has been named the exclusive air taxi provider for the 2028 Los Angeles Olympic and Paralympic Games.
Archer’s Midnight aircraft, a piloted electric air taxi designed to carry four passengers, will be whisking around VIPs, fans, and stakeholders between venues and key locations like LAX, Hollywood, Santa Monica, and even Orange County. Think 10-20 minute flights that skip the infamous LA gridlock and land you right where the action is—on the roof, basically.
“We want to transform the way people get around Los Angeles and leave a legacy that shapes the future of transportation in America. There’s no better time to do that than during the LA28 Games,” said Adam Goldstein, CEO and founder of Archer Aviation.
And Midnight isn’t just a pretty rotor. It’s a whisper-quiet, emission-light aircraft with 12 rotors and a redundant, airline-level safety design.
What’s more, Archer and LA28 are working together to electrify vertiport hubs around the city—think futuristic sky stations—to serve not only Games-time needs but also to plant seeds for a post-Olympic air mobility network.
The air mobility market has been fast developing over the past few years, featuring the likes of Hyundai partnership with China’s XPeng HT Aero and Toyota's backing of Joby Aviation, a U.S. venture. Joby bought Uber Elevate in 2020, hoping to someday pair its air taxis with Uber’s ride-hailing app.
Archer, for its part, has been busy building a strategic partnership with United Airlines, which has already placed orders for the aircraft and is helping with logistics to integrate air taxis into airport-to-downtown travel. More than a demo for the cameras, the LA28 partnership will showcase urban air travel for real-world daily use, starting with one of the most high-profile events on Earth.
After raising false hopes in Paris, the air taxi dream is aiming for liftoff in LA—and this time, it might just stick the landing.

Read more